Double sided adhesive PE Foam TapeDuploColl 50001 LSE
- 1
- For non-polar plastics
- For uneven or structured surfaces
- Synthetic rubber
DuploColl 50001 LSE from Lohmann is the right adhesive tape if you want to permanently bond low surface energy materials. LSE stands for Low Surface Energy and clearly identifies this foam adhesive tape for use on non-polar surfaces. With a material thickness of approx. 1 mm, it provides vibration damping and enables stress-free bonding of different materials. At the same time, it compensates for differing expansion behavior of various substrates during temperature fluctuations.
The foam tape is also recommended for bonding uneven or structured surfaces. Under applied pressure, the foam carrier penetrates recesses and compensates for irregularities due to the thickness of the carrier. As a result, the adhesive tape bonds immediately after application.
Adhesive / Carrier
The white foam carrier is fully coated on both the exposed and covered sides with a synthetic rubber adhesive. The combination of excellent initial tack and compressible polyethylene foam increases the effective bonding area. The synthetic rubber adhesive can be used without loss of adhesion strength in temperature ranges from -25 °C to +80 °C. For protection, the adhesive tape is covered with a blue polyethylene liner.
|
Tips & Notes Although the foam tape is highly temperature-resistant, the recommended processing temperature is between +18 °C and +35 °C. The substrates to be bonded should also be acclimatised to room temperature prior to application to prevent condensation, which could negatively affect adhesion. |
Applications
- Bonding of non-polar substrates such as polyethylene and polypropylene
- Permanent fastening of covers as well as decorative and functional trims in interior applications
- Mounting of hooks and holders in sanitary and kitchen areas
- Self-adhesive coating of various materials such as metal, plastic, glass and wood variants
Quality features
During the manufacture of DuploColl 50001 LSE, Lohmann refrains from using toluene. In addition, the foam adhesive tape offers good die-cutting properties.
| Dimensions | Packaging |
| 6 mm x 50m | 50 rolls |
| 9 mm x 50 m | 33 rolls |
| 12 mm x 50 m | 25 rolls |
| 15 mm x 50 m | 20 rolls |
| 19 mm x 50 m | 16 rolls |
| 25 mm x 50 m | 12 rolls |
| 30 mm x 50 m | 10 rolls |
| 38 mm x 50 m | 8 rolls |
| 50 mm x 50 m | 6 rolls |
Packaging
DuploColl 50001 LSE is supplied wound adhesive-side in on a stable cardboard core with an inner diameter of 3 inches (76 mm). Silicone-coated cardboard discs are placed between the rolls to protect them during transport and storage.
Shelf Life
When stored in the original packaging under normal conditions (humidity 50–70% RH, room temperature 17–20 °C), DuploColl 50001 LSE has a shelf life of 12 months from delivery.
Custom Services
Beyond standard products, we offer customized solutions regarding dimensions, presentation, and processing options.
As a direct distribution partner of Lohmann, K+K Klebetechnik offers:
- Order quantities tailored to your needs
- Attractive pricing
- Standard dimensions usually available from stock
- Access to the full Lohmann product portfolio
Free Samples
Not sure if DuploColl 50001 LSE is suitable for your application? Test it free of charge with a complimentary sample.
For pricing, delivery times, or technical advice, please contact our application specialists and receive your non-binding quotation promptly.
